It all started with my modest little coop that I ended up adding on to.
(because of chicken math- you go to get 2 chickens, end up bringing home 4).
But our modest little coop was turning 8 years old,
and it just wasn't in good shape any more.
Wood began to rot, and it was time for a replacement.
So we headed over to the local big box hardware store,
and 3 large carts later, we started the new 8x10' shed for the chickens.
Big E and I spent some time checking out some of the sheds at a local retail shed lot.
We took measurements and made notes on what we liked and didn't like.
Mostly I took notes on what I liked and didn't like.
And then the work began.
We used pressure treated lumber for the pieces closest to the ground and
put those on top of cinder blocks to help prevent rot.
One the floor joists were done, we laid out the floor.
Then we started the process of putting up the walls
and the roof trusses.
We had a deadline of the beginning of November
because I already had 3 new Guineas coming and had purchased
early bird tickets for a local chicken swap
hoping to score some more birds.
Wasn't too long before we had the T1-11 siding going on
and the plywood being put on the roof.
We used the 2 small windows from our old coop to put on the front.
We have plenty of roosting space and nesting boxes for additional birds.
I now keep 50 pounds of feed in a metal trash can in the coop.
We also used the old PVC feeders from the old coop only now they are completely inside the coop
instead of being on the outside.
The waterer made out of a 5 gallon bucket with side nipples is also kept in the coop.
We have a sliding door that we can raise and lower without going into the coop or run.
It works on a rope run through eye bolts that can be tied to a cleat on the side of the coop to keep it open.
We weren't able to build the permanent run before the weather changed,
but we've utilized the existed fencing, some netting and T-Posts
from a temporary run we had to make a run they can be safe from
most predators during the day.
At night they're all locked up tight in the coop.
We still have some finishing touches to do.
We plan on installing 3 more larger windows (18"x22")
on each of the other walls to provide more natural light and ventilation in the summer.
I'd like a small loft built to provide an area to store the
bales of shavings and straw to keep them up off the floor.
I also want to install linoleum on the floor to protect the wood from moisture
and make it easier to clean and disinfect when needed.
And of course, we need a secure run.
We finished just in time for all the new birds.
I call the shed
Cluckingham Palace.
So far it houses 3 Guineas King Richard, Beatrice and Eugenie,
the 4 original hens- 2 Barred Rocks Louise and Bertha, the Light Brahma Daisy and the Naked Neck who is still unnamed.
I've added a blue laced red Wyandotte, a standard white silkie,
an orange and white Satin Silkie named Beaker, a bantam silkie named Fuzzball, 2 Salmon Favorelles- one named Jaws the other nameless, an Ameraucana still unnamed and a black bantam cochin my friend had to rehome who we think is going to be called Raven Lucretia.
She's kind of a bad ass.
I have 3 more pullets coming in a couple of weeks:
another Ameraucana, another Light Brahma and a Blue Rock.
I'm sure there will be many more chicken posts to come in the near future along with some updates about things around the house.
We've been pretty busy around here!
What did something like this cost?
ReplyDeleteIt was around $900 which is about half the cost of purchasing one already made.
Delete